PrimeWeld CUT50D 50-Amp Portable Plasma Cutter
It's difficult to beat the convenience of a portable plasma cutter. Keep your preferred cutting tool within reach with the CUT50D Portable Plasma Cutter. This light-weight, 50-amp machine provides heavy-duty cutting right out of the box. With 50 amps of power on tap, this portable plasma cutter can cut up to 1/2-inch thick steel plate, no problem.
A Portable Plasma Cutter — Convenience & Power
A plasma cutter is one tool that every fabricator needs in their arsenal. Save space, time, and money with PrimeWeld's 50-amp air inverter plasma cutter. It's all you need for an array of cutting applications, all in one convenient package.
The CUT50D is a MOSFET (metal–oxide–semiconductor field-effect transistor) inverter plasma cutter that weighs only 23 pounds. This portable machine is light enough to take between shop, job site, and home. Imagine bringing your plasma cutter to your friend’s to handle a little auto body and suspension work!
Cut Sensitive Sheet Metal With Ease
The lower limit output of 20 amps cuts sheet metal as thin as 22-gauge without blowing your nicely cut edges out, saving preparation time to get the workpiece prepared for welding.
The CUT50D Air Inverter Portable Plasma Cutter can power any DIY workshop project. Durable build quality combined with innovative design make it an excellent choice. Plus, get helpful support from a knowledgeable service team whenever you need it. Bring exceptional cutting power to your shop for under $300.
High-Frequency Arc Control for Precise Cuts
This portable plasma cutter’s high-frequency arc control uses a non-pilot “touch and lift” arc start. Lift-start machines are great for drag starts and drag cutting. Just touch the torch momentarily to light the arc, then drag the torch across the surface to make your cut. Using the CUT50D plasma cutter couldn't be easier. With the torch tip so close to the metal, drag starts let you get finer, more precise cuts with your portable cutter.
LIGHTWEIGHT, WITH DUAL-VOLTAGE INPUT POWER
PrimeWeld's CUT50D 50A Air Inverter Portable Plasma Cutter can use whatever voltage is available! This portable, lightweight machine runs on either 120 volts or 240 volts input power. It uses an adapter pigtail to enable the base 240-volt power supply to plug into 120-volt outlets. Powerful plasma cutting power at your fingertips, no matter where you find yourself.
NO-HASSLE 3-YEAR WARRANTY!
If you run into issues, have a problem, or want advice, call PrimeWeld for personalized support from live people. We pride ourselves in being easy to contact, knowledgeable, and deliver the kind of troubleshooting know-how that keeps you producing.
Features
50A Air Inverter Portable Plasma Cutter Features:
- Dual 120/240-volts input
- MOSFET Inverter-powered
- Start cutting out of the box
- Lift-type arc start
- Air Supply Postflow
- Drag Start capability
PROTECTION FEATURES:
- Overcurrent protection
- Overheating protection
- Power spike protection
USABILITY FEATURES:
- Dinse connections
- Front Panel air pressure gauge
- Digital Power Display
SPECIFICATIONS:
BREAKER SIZE:
- (120V) 30 amps
- (240V) 50 amps
PLASMA OUTPUT IN AMPS:
- Arc 120 volts: 20-40 amps
- Arc 240 volts: 20-50 amps
DUTY CYCLE:
- 60 percent @ max rating (120/240V)
- 100 percent @ 23 amps (120V)
- 100 percent @ 40 amps (240V)
AIR PRESSURE:
- 40-75 PSI
AIRFLOW REQUIRED:
- 5 CFM @ 80 PSI
AIR POSTFLOW:
- 5 seconds
WEIGHT:
- 22.5 pounds
Specifications
SPECIFICATIONS TABLE
The CUT50D Air Inverter Portable Plasma Cutter weighs only 8.9 kgs, less than 20 lbs. It is industrial-rated, with 50-amps of cutting current, lightweight, and portable. Check out the other specifications for this highly-rated plasma cutter below:
| Model | CUT50D (110/220V) | |
|---|---|---|
| 110V | 220V | |
| Power Supply / Phases (V-Ph) | 220V +/-15% | 110V +/-15% |
|
Duty Cycle @ 78°F (25C) |
60% @ 50 Amps |
60% @ 40 Amps |
| Rated Power (KVA) |
5.90 |
4.40 |
| Input Current Range (A) |
35-40 |
40-45 |
| Output Current Range (A) |
20-50 Amps |
20-40 Amps |
| Rated Output Voltage (V) |
100 |
96 |
| No-Load Voltage (Open CricuC(V)) |
260 |
260 |
| Efficiency (%) |
60 |
60 |
| Insulation Class |
F |
F |
| Protection Class |
IP21S |
IP21S |
| Plasma Arc Starting |
HF Scratch Start |
HF Scratch Start |
| Air Flow Pressure Range |
40 - 65 PSI |
40 - 65 PSI |
| Air Flow Rate (CFM) |
5 L/min |
5 L/min |
| Clean Cutting Thickness (mm) |
12mm |
12mm |
| Cutting Thickness Severance (mm) |
16mm 065psi |
12mm 065psi |
| Cutting Speed (10mm) |
200mm/min (065psi) |
150mm/min (065psi) |
| Machine Dimensions (inch) |
13.7 x 5.6 x 9.2 |
13.7 x 5.6 x 9.2 |
| Shipping Weight (kg) |
8.9kg (19.62 lb) |
8.9kg (19.62 lb) |
What's Included
CUT50D Dual Voltage 60-Amp Plasma Cutter Comes With:
- AG60 Torch
- 13-foot Torch Hose
- Flowmeter
- Air supply hose
- Ground Clamp 10 ft
- Brush
- Hand-held mask
- Reference Manual
- 240-volt to 120-volt adapter pigtail
- FREE SHIPPING IN A WELL-PACKED, HEAVY-DUTY CARTON!
How to Use
TECHNIQUE TIPS
- It is easier to pull the torch through the cut than to push it.
- To cut thin material, reduce the amperage until you get the best quality cut.
- Use the correct size tip orifice for the amperage being used.
- For straight cuts, use a straight edge or cutting buggy as a guide. For circles, use a template or circle-cutting attachment.
- Check that the front-end consumable parts of the plasma cutting torch are in good condition.
